Product Knowledge Base

Space shortcuts

Page tree

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 78 Next »

Introduction

  • The Credential Store (CS) allows sensitive data to be encrypted and stored securely and independently of the application(s) such as YADE and the JobScheduler YADE JITL Jobs that use this data.
  • The advantage of using a CS is that the CS stores sensitive information such as credentials in a standardized, secure and fully encrypted database and sensitive authentication information is not exposed in use. Applications access the CS database by using password, encryption-key file or a combination of both.
  • The CS requires the use of a standard open database format (.kdb or .kdbx ), which allows the use of graphical and API interfaces across the most relevant operating systems.

Scope

This article describes the use of the Credential Store with the YADE Client and describes a relatively simple example configuration to allow users to get a working Credential Store up and running as easily as possible.

This description provided in this article also applies for the configuration of a settings file and Credential Store to enable the use of the Credential Store with the YADE JITL job.

Feature Summary

The Credential Store provides the following features: 

  • Compliance:
    • All sensitive configuration information is encrypted.
    • Access to the Credential Store can be securely protected by password, key file or password and key file.
      "Password-free" authentication is possible.
    • Connection Authentication files such as public key files are used without being written to the file system.
  • Management
    • Configuration information can be centrally managed outside of a file transfer environment.
  • Deployment
    • The same file transfer configuration file can be used for development and production environments - only the Credential Store needs to be changed during deployment.
  • Scope
    • The Credential Store can be used for the following configuration information:
      • file transfer source, target, proxy and  jump host / DMZ,
      • pre- and post-processing operations.
    • The Credential Store can be used for file transfers carried out with both the YADE Client and the JobScheduler JADEJob and JADE4DMZJob JITL jobs.

Example Description

The example presented in this article illustrates the configuration and use of the Credential Store in a simple file transfer operation that is carried out with the YADE Client.

The file transfer operation is based on the file transfer example described in The YADE Client Command Line Interface - Tutorial 1 - Getting Started article. The tutorial describes the configuration required to download a number of files from an online server provided by the SOS GmbH and save these files on the user's local file system. Using this server means that users can get a working example up and running with a minimum of effort. A simplified version of the configuration used in the tutorial (only specifying transfer by FTP) is available as a download: sos-berlin_demo_2_local.xml.

In the current example, the Credential Store is to store configuration information for the online server - i.e. for the file transfer source. The principle described can be equally well used for the configuration of multiple file transfer source, target, proxy and jump-host servers and for the other file transfer protocols that can be used by the YADE Client.

Note that a YADE Client is required to carry out the example file transfer. Instructions for installing and configuring the YADE Client can be found in the YADE - Tutorials article.

Configuration Procedure

Installing the Credential Store and configuring the KeePass database

KeePass 2 has been used in the current article to implement the Credential Store database. The installation and use of KeePass 2 is described on the KeePass Web Site.

Feature Availability

FEATURE AVAILABILITY STARTING FROM RELEASE 1.12.2

The full range of Credential Store features such as secure, compliant and password-free use of the Credential Store as well as compatibility with KeePass .kdb databases requires the YADE Client in version 1.12.2 or newer.

Database Configuration

Credential Store databases are stored as either .kdb or .kdbx  files on the file system.

For the examples described in the current article the following database was configured (on a Windows system):

  • Path: %USERPROFILE%\jade_demo\keepass\demo_cred_store.kdbx
  • Master Password: sos

Note that a Master Key file can be used to provide further protection for the database. This is described in the Advanced Configuration section of this article below.

Adding the configuration information to the Credential Store

Configuration information is stored in the Credential Store as an Entry and Entries can be organized into Groups.

The following information can be stored in a CS Entry:

  • Title: The identifier for the Entry, this could be a string containing, for example, the host name/server name.
  • User name: The user identification of a user account who is authenticated for the operation.
  • Password: Assigned password for a user account or passphrase for a private key.
  • URL: The host name/server name or IP address of the server.
  • Notes: This block can be used to specify additional parameters for the file transfer.
  • File Attachment & Custom Fields: Files such as PGP or SSH private keys can be stored as attachments.
    • A first attachment is specified as an attachment .
    • Further attachments are specified using my_custom_field parameters.
      YADE will retrieve the contents of an attached file at run-time - intermediate or temporary files are not created when reading attachments.
      Note that attachments are specified in the KeePass GUI via the AdvancedEdit Entry tab.

The following information needs to be specified for the current example:

  • Groups: demo,ftp (optional)
  • Title: demo_on_test.sos-berlin.com
  • User name: demo
  • Password: demo
  • URL: test.sos-berlin.com (Alternatively, the IP address could have been specified here.)

The following screenshot shows that two Groups have been configured for the current example, named "demo" and "ftp", along with the Entry "demo_on_test.sos-berlin.com".

The next screenshot shows the configuration of the parameters in the "demo_on_test.sos-berlin.com" Entry:

Integrating the Credential Store in a File Transfer Configuration

The use of the Credential Store is specified in YADE Client file transfer configuration files, which are written in XML. We recommend using the SOS XML Editor to edit these files. Instructions for downloading, installing and using the XML Editor are linked from this page.

In the remainder of the current article, it is assumed that readers have made themselves familiar with the organization of the YADE Client file transfer configurations into Profiles and Fragments. This is described in The YADE Client Command Line Interface - Tutorial 1 - Getting Started article mentioned above.

The current example uses the XML configuration from the Getting Started tutorial article above and describes the necessary configuration elements required to move the sensitive information such as user name and password from the XML file to the Credential Store. Users wishing implement the current example should download the tutorial file transfer configuration file linked above and open it in their XML Editor, where they can then add the necessary configuration information.

The information required to use the Credential Store falls into two "areas":

  • Information about the Credential Store itself (location, how to access its contents, etc.).
    This information is configured in the XML file in a CredentialStoreFragment.
  • Information about how the information in the Credential Store (server address, password, etc.) is to be accessed for the file transfer.
    This information is stored as a string in each of the relevant XML ProtocolFragment child elements (Hostname, Account. etc.).

In addition, the ProtocolFragment element has a reference specifying that the Credential Store is to be used.

Specifying the Credential Store

The following list shows the organization of the XML elements required to specify the Credential Store. These elements and their attributes are shown in full in the XML Editor screenshot below. 

  • Fragments
    • ProtocolFragments
      • FTPFragment name="ftp_demo_sos-berlin_cs"
        • ....
        • CredentialStoreFragmentRef ref ="ftp_demo"
    • CredentialStoreFragments
      • CredentialStoreFragment name ="ftp_demo"
        • CSFile file path  %USERPROFILE%\jade_demo....
        • CSAuthentication
          • PasswordAuthentication
            • etc.
        • CSEntryPath
  • Profiles
    • etc.

Addressing the information in the Credential Store

Parameters stored in a Credential Store database Entry can be addressed in the CredentialStoreFragment XML element as follows:

  • The CSEntryPath element is used to specify the base path in the Credential Store database to the Entry.
    In the current example this would be set to:
    • demo/ftp/demo_on_test.sos-berlin.com
      where demo and ftp are (optional) Group names, as already mentioned, and demo_on_test.sos-berlin.com is the Title of the KeePass database Entry.

The Credential Store Entry parameters are addressed using one of the following syntaxes:

  • relative:
    • cs://@parameter_name, where the parameter_name is the name of the relevant parameter specified for the Entry - for example, url and the CSEntryPath element is filled as shown above
  • fully specified:
    • cs://demo/ftp/demo_on_test.sos-berlin.com@parameter_name, and where the CSEntryPath element, which is a required element, is left blank

The following parameters are fully specified in the Credential Store in the current example:

  • Hostname: cs://demo/ftp/demo_on_test.sos-berlin.com@url (where @url specifies the URL element stored in the database )
  • Account: cs://demo/ftp/demo_on_test.sos-berlin.com@user (where @user specifies the User name element stored in the database)
  • Password: cs://demo/ftp/demo_on_test.sos-berlin.com@password (where @password specifies the Password element stored in the database)

Note that a full list of parameters is described in the Adding an Entry to the Credential Store section above.

Configuration in the XML Editor

Tip

The XML Editor includes up-to-date documentation for elements as can be seen in the screenshot below, which shows the documentation for the Hostname element.

The parts of the XML configuration relevant to the use of the Credential Store are shown in the following screenshot of the configuration for the current example, with parameter values highlighted according to their function:

 

The Transfer Target Directory

As can be seen in the screenshot above, the CopyTarget.Directory parameter is by default set for a Windows environment and set to:

  • ${USERPROFILE}\jade_demo\transfer_receive

Depending on their operating system, users may find it necessary to modify this attribute before running the example.

XML Listing

The following code block can be opened to show the full XML configuration for the example:

Simple Example Listing 
<?xml version="1.0" encoding="utf-8"?>
<Configurations xsi:noNamespaceSchemaLocation="http://www.sos-berlin.com/schema/jade/JADE_configuration_v1.0.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <Fragments>
    <ProtocolFragments>
      <FTPFragment name="ftp_demo_sos-berlin_cs">
        <BasicConnection>
          <Hostname><![CDATA[cs://demo/ftp/demo_on_test.sos-berlin.com@url]]></Hostname>
        </BasicConnection>
        <BasicAuthentication>
          <Account><![CDATA[cs://demo/ftp/demo_on_test.sos-berlin.com@user]]></Account>
          <Password><![CDATA[cs://demo/ftp/demo_on_test.sos-berlin.com@password]]></Password>
        </BasicAuthentication>
        <CredentialStoreFragmentRef ref="ftp_demo" />
      </FTPFragment>
    </ProtocolFragments>
    <CredentialStoreFragments>
      <CredentialStoreFragment name="ftp_demo">
        <CSFile><![CDATA[%USERPROFILE%\jade_demo\keepass\demo_cred_store.kdbx]]></CSFile>
        <CSAuthentication>
          <PasswordAuthentication>
            <CSPassword><![CDATA[sos]]></CSPassword>
          </PasswordAuthentication>
        </CSAuthentication>
        <CSEntryPath />
      </CredentialStoreFragment>
    </CredentialStoreFragments>
  </Fragments>
  <Profiles>
    <Profile profile_id="ftp_server_2_local_cs">
      <Operation>
        <Copy>
          <CopySource>
            <CopySourceFragmentRef>
              <FTPFragmentRef ref="ftp_demo_sos-berlin_cs" />
            </CopySourceFragmentRef>
            <SourceFileOptions>
              <Selection>
                <FileSpecSelection>
                  <FileSpec><![CDATA[.*]]></FileSpec>
                  <Directory><![CDATA[./]]></Directory>
                </FileSpecSelection>
              </Selection>
            </SourceFileOptions>
          </CopySource>
          <CopyTarget>
            <CopyTargetFragmentRef>
              <LocalTarget />
            </CopyTargetFragmentRef>
            <Directory><![CDATA[${USERPROFILE}\jade_demo\transfer_receive]]></Directory>
          </CopyTarget>
        </Copy>
      </Operation>
    </Profile>
  </Profiles>
</Configurations>

 

Running the YADE Client with the Credential Store

The use of the Credential Store is contained within the settings file and is not exposed when calling the YADE Client. For example, on Windows systems, the YADE Client is called for the current example using:

Call on Windows systems
C:\Program Files\sos-berlin.com\jade\client\bin>jade.cmd -settings="%USERPROFILE%\jade_demo\sos-berlin_demo_2_local_cs.xml" -profile="ftp_server_2_local_cs"

After the YADE command has finished execution the number of files transferred can be read from the log file.

Note that the log files neither indicate that a credential store has been use for the transfer nor reveal any passwords. 

Download Example

A download is available containing a full XML configuration file for Windows users and .kdbx database: jade_demo.zip

Windows users with the necessary permissions will be able to use these files by unpacking the zip file to a jade_demo folder in their User directory.

Users of other operating systems may have to make minor configuration changes.

Advanced Configuration

Key File Authentication

Key file authentication can be used for the Credential Store either alone or together with the password authentication described in the example above.

This option allows the the Credential Store to be used completely securely, yet without passwords, if required.

Key file authentication has to be configured for the Credential Store and in the XML settings file.

Configuring key file authentication in the Credential Store

KeePass provides a Create Composite Master Key function that is reached with the Files / Master Key... menu item. screen

The Create Composite Master Key function is shown in the following screenshot  (Note that the Show expert options checkbox has to be selected first.):

Note also that the Master Password checkbox should not be selected if key file authentication is to be used without a master password.

The entropy of the key generated can be increased as part of the key creation procedure. This is done as part of the key generation procedure in the interface shown in the next screenshot.

For the purpose of this article the key has been saved in the jade_demo folder used for the download example.

The next section describes the configuration of the XML settings file to include a reference to this file.

Configuring key file authentication in the XML settings file

Key file authentication is configured in the XML settings file by specifying a KeyFileAuthentication element as a child of the CSAuthentication element in the Credential Store fragment.

The key file element can be added either instead of or alongside a password authentication element as required.

This is shown in the following list:

  • CredentialStoreFragments
    • CredentialStoreFragment name ="ftp_demo"
      • CSFile file path%USERPROFILE% \jade_demo....
      • CSAuthentication
        • PasswordAuthentication
          • .CSPassword myPassword
        • KeyFileAuthentication
          • CSKeyFile %USERPROFILE%\jade_demo\cs_key_file\demo_credential_store.key
      • CSEntryPath

Connection authentication key files

The Credential Store can be used to store RSA and similar connection authentication key files. These are stored in the Credential Store database as attachments.

Configuring authentication key files in the Credential Store

Attachments are added to the Credential Store in KeePass in the File Attachments section of the Advanced tab as shown in the screenshot below. Note that only one attachment can be added for each Credential Store Entry :

Configuring authentication key files in the XML settings file

A first attachment for, for example SSH would be configured in the XML settings file by specifying an AuthenticationFile element in the SSHAuthentication element.

The key file element can be added either instead of or alongside a password authentication element as required.

This following list shows the configured of the SFTP Fragment required to carry out the download from the test.sos-berlin.com SFTP/FTP server that was used for the simple example described above: The AuthenticationFile element that specifies the Attachment in the Credential Store Entry is specified in the same way as the Hostname and other elements described in the example above.

  • SFTPFragment name ="sftp_demo_sos-berlin_cs"
    • BasicConnection
      • Hostname cs://demo/sftp/demo_on_test.sos-berlin.com@attachment
    • SSHAuthentication
      • Account
      • AuthenticationMethodPublicKey
        • AuthenticationFile cs://demo/sftp/demo_on_test.sos-berlin.com@attachment
        • Passphrase myPassPhrase
      • CredentialStoreFragmentRefref="ftp_demo"

Note that this list also shows the use of a Passphrase element for the AuthenticationFile element. This is not required for authentication with the test.sos-berlin.com SFTP server but is provided as an illustration. 

Passphrase elements are stored in the Credential Store as Notes.

See Also:

 

  • No labels