Introduction
LDAP authentication for the JOC Cockpit is offered from the JS7 - LDAP Identity Service and relies on a connection between the JS7 - REST Web Service API and the LDAP Server.
- Early JS7 releases make use of JS7 - Shiro Identity Service, for migration see JS7 - Shiro Identity Service Migration.
- The connection to the LDAP Server be secured, see JS7 - LDAP over TLS (STARTTLS) and LDAP over SSL (LDAPS).
This article describes the steps for configuration with an LDAP Directory Service:
- Step 1: LDAP Configuration
- Step 2: Authentication
- Step 3: Authorization
- Define roles
- Define groupRolesMapping
- Define the LDAP attribute search for groups
Relevant Tools
- An LDAP Browser:
- The screenshots used in this article were made with the Softerra LDAP Browser that was configured to use the relevant LDAP Directory Service.
- A command line utility:
- The examples used in this article are executed with ldapSearch.
Proceeding
The following diagram provides an overview of the setup proceeding:
Step 1: Basic LDAP Configuration
The LDAP configuration can be managed from the Administration->Manage Identity Services view like this:
Add Identity Service
In a first step click the Add Identity Service button that brings up the following popup window.
- A Name has to be specified that identifies the LDAP Identity Service.
- The Identity Service Type gives a choice
LDAP
: to map user/role assignments from security group membership in the LDAP Server,LDAP-JOC
: to manage user/role assignments from the Identity Service.
- Do not make the Identify Service Required before you are certain that the service configuration works fine.
- Select the
single-factor
Authentication Scheme.
Manage Identity Service Settings
In a next step set up the configuration of the service:
- Select the Manage Settings action menu item like this:
This brings forward a popup window with the following tabs:
- Simple Mode: The most frequently used settings are available.
- Expert Mode:: The full set of settings is available.
Specify General Settings
The following table lists the general items used to configure an LDAP connection.
Name | Value | Description |
---|---|---|
LDAP Server URL |
| The host and the port of the LDAP Server. |
LDAP Start TLS | true|false | To enable Starttls set the value to Please note that the server must be prepared to serve with StartTls. To check this, you can use an LDAP browser. Configure your LDAP Server there and click the "Enable Starttls Button" On client side you will need the certificate and you have to add the certificate to your truststore. The path to your truststore is defined in the
Example values:
Note: we habe had difficulties when using Starttls with the JRE 1.8.0_151 and have overcome these by installing the corresponding JDK. |
Host Name Verification | true|false | Enables the host name verification of the certificate. The default value is off. |
LDAP Truststore Path | ||
LDAP Truststore Password | ||
LDAP Truststore Type |
Step 2: LDAP Authentication
Specify Authentication Settings
The following table lists possible values for authentication with an LDAP Server:
The value {0} will be substituted with the account name.
Name | Value | Description |
---|---|---|
LDAP User DN Template |
| Should work from scratch for Microsoft Active Directory®. For login use |
uid={0},ou=People,dc=sos | Use with Microsoft Active Directory® and other LDAP Servers. Look up the For login use | |
cn={0},ou=Users,dc=sos,dc=berlin,dc=com | Use with Microsoft Active Directory® and other LDAP Servers. The Common Name For login use | |
uid={0},dc=example,dc=com | Use with Public LDAP Server. For login use |
Step 3: Authorization
Authorization includes the assignment of roles to user accounts. Roles, in turn, hold permissions. For details see JS7 - Manage Roles and Permissions.
There are two options for assignment of roles to user accounts depending on the Identity Service Type:
LDAP
: add a Group/Roles mapping: membership of a user account in a security group of the LDAP Server is mapped to a role in the Identity Service.LDAP-JOC
: add a user account and assign roles. Accounts are managed with the Identity Service in parallel to the LDAP Server. No user passwords are managed with JOC Cockpit as authentication is performed with the LDAP Directory Service.
Assign Roles with Identity Service
For details see JS7 - Manage Roles and Permissions.
Map Roles from LDAP Security Groups
If the Roles are assigned with the JOC Cockpit Identity Service Management by using the Identity Serviced LDAP-JOC, then you can skip this chapter.
The group roles mapping defines a search for groups and a map that assigns these groups to a role.
The search for groups can be executed with one of these options
- The Account has a memberOf attribute. Then you can retrieve the list of groups with the User Search. Proceed with Using memberOf with User Search.
- The Account does not have a memberOf attribute. The group contains the Accounts that are members of the group, Then proceed with Using Group Search.
These options cannot be mixed!
With the founded groups a map is defined in the LDAP Settings, that maps the groups to roles.
Substitution of the account value
In both searches the account can be substituted
In the groupSearchFilter
and the userSearchFilter
you can specify %s e.g.
(uid=%s)
The %s will be substituted with the account from the login. If you login with domain\account
or account@domain
the value for the user
is account
.
You can specify ^s e.g.
(uid=^s)
The placeholder ^s
will be substituted with the original value from the login e.g. account@domain.
Approach 1: Using Usersearch to find memberOf Attribute
This approach looks for the Account entry and reads the memberOf attribute. This attribute is often used when, for example, configuring Microsoft Active Directory® LDAP servers.
Define a userSearchFilter
and a searchBase
that will find the account .
Microsoft Active Directory® that supports memberOff attribute
Name | Value | Description |
---|---|---|
LDAP Search Base |
| The search base for the ldap search |
LDAP User Search Filter | Default: (sAMAccountName=%s) |
General
Name | Value | Description |
---|---|---|
LDAP Search Base |
| The search base for the ldap search |
LDAP User Search Filter | Example: (uid=%s) |
An LDAP Browser can be used to get the correct values for the searchBase
and the userSearchFilter
. Perform a directory search with the values. You should find only one entry.
The searchBase
is the value of the base DN (or ParentDN in the screenshot above).
Hint: if the attribute name in your environment is not the default memberOf then you can specify the name of the attribute with the groupNameAttribute
key as described in the next section.
Approach 2: Using Groupsearch to find groups an account is member
If the Account entries have the memberOf attribute then you can skip this section and proceed with Using memberOf with User Search.
To specify the group search the following settings have to be specified
- LDAP Group Search Base
- LDAP Group Search Filter
- LDAP Group Name Attribute
Define the groupSearchBase
and the groupSearchFilter
. For example:
groupSearchBase = ou=Groups,dc=sos
groupSearchFilter = (uniqueMember=uid=%s,ou=People,dc=sos)
Getting the value for the groupSearchBase
Identify the location where the groups are stored. This is your groupSearchBase
.
Getting the value for the groupSearchFilter
Click one group Entry (in the screenshot, cn=apl
) and see how the members are stored there.
The groupSearchFilter is configured with attr=val
where attr
is name of the attribute and val
is the content. In this example, the attr
is uniqueMember
and the val
uid=%s,ou=People,dc=sos
, where the userid
is replaced with %s
. This results in:
groupSearchFilter = (uniqueMember=uid=%s,ou=People,dc=sos)
Now set the groupNameAttribute
to the name of the attribute that contains the group name.
groupNameAttribute = cn
Hint: The complete content of this attribute must be used in the groupRolesMap
attribute. Typical content of the attribute could be ou=Groups,dc=sos,cn=groupname
.
Substitution of the account name
If the roles are assigned with the JOC Account Manager using the Identity Service LDAP-JOC you can skip this chapter.
If the value of the member of the groups contains the Account name from the login then you can skip this chapter
Sometimes the values of the member do not contain the Account Name from the login but, for example, the cn
of the Account. In this case you have to search for the Account first and then specify the name of the attribute that should be used instead of the Account name from the login .
To achieve this, specify a searchBase
, a userSearchFilter
and a userNameAttribute
.
searchBase = ou=People,dc=sos
userSearchFilter = (uid=%s)
Then identify the name of the attribute that contains the value for substitution. For example:
userNameAttribute = cn
Group Roles Mapping
The mapping is defined in the expert tab of the LDAP Identity Service Manage Settings view.
Note that the value of the group depends on the result of the group search. It is the value of the attribute that you have specified with the groupNameAttribute
. Default for the groupNameAttribute
is memberOf. This indicates that if you are retrieving group memberships by use of the memberOf attribute of an account then you have to specify the complete value of the memberOf attribute value, i.e. the distinguished names of group hits.
Example for Group Mapping with Microsoft Active Directory by memberOf Attribute
A typical mapping when using Microsoft Active Directory with the memberOf attribute for group memberships includes to specify group hts by their distinguished name like this:
CN=Group1,OU=SpecialGroups,OU=Groups,OU=Company,DC=sos-berlin,DC=com ==> all
CN=AnotherGroup,OU=SpecialGroups,OU=Groups,OU=CompanyDC=sos-berlin,DC=com ==> adminitrator
CN=Beginners,OU=SecurityGroups,OU=Groups,OU=Company,DC=sos-berlin,DC=com ==> business_user
Example for Group Mapping by cn Attribute
A mapping that is based on group search would identify group hits by the value of their common name like this:
sos ==> it_operator
apl ==> administrator,application_manage
The configuration will look like this:
Examples and special configurations
userDnTemplate | groupSearchBase | groupNameAttribute | groupSearchFilter | searchBase | userNameAttribute | userSearchFilter | |
---|---|---|---|---|---|---|---|
Group Search | uid={0},ou=People,dc=sos | ou=Groups,dc=sos | cn | (uniqueMember=uid=%s,ou=People,dc=sos) | |||
Group Search where the member attribute does not contain the account name but the common name | uid={0},ou=People,dc=sos | ou=Groups,dc=sos | cn | (uniqueMember=uid=%s,ou=People,dc=sos) | ou=People,dc=sos | cn | (uniqueMember=uid=%s,dc=example,dc=com) |
memberOf in the account record | uid={0},ou=People,dc=sos | ou=People,dc=sos | (uid=%s) | ||||
public LDAP Server | uid={0},dc=example,dc=com | ou | dc=example,dc=com | uid | (uniqueMember=uid=%s,dc=example,dc=com) |
A public LDAP Server for testing the connection
An online public LDAP server which can be accessed using a relatively simple configuration is available from Forum Systems. This server can be used to set up a test environment with LDAP authentication. In this article we will refer to the authentication of two user accounts on this server - gauss and newton - that are each members of a different LDAP group as shown in the following table:
Account Name | Password | LDAP Group | Shiro Role |
---|---|---|---|
gauss | password | mathematicians | all |
newton | password | scientists | it_operator |
Logging
References
Use Cases
For debugging of LDAP Server connections