General

Multiple JobScheduler can built a cluster.
All JobScheduler of a cluster must have the same Id and must use the same database.
Furthermore, each JobScheduler of a cluster must start with one of the following cluster options

• -exclusive
• -exclusive -backup
• -distributed-orders

Look at http://www.sos-berlin.com/doc/en/scheduler.doc/command_line.xml for more information about JobScheduler start options

JobScheduler Cluster

All JobScheduler of this cluster have the start option -exclusive.

After you have start all JobScheduler of this cluster only the first one is active.

The other JobScheduler are waiting for activation.

We assume that all JobScheduler of the cluster have the same configuration (Jobs, Job Chains, Orders, etc.)

If you terminate the active JobScheduler then one of the other will go active automatically and knows all states, i.e. wether the Jobs or Job Chains are stopped or not, Job Chain Nodes are stopped, skipped or not, Orders are suspended or not and on which step they are.

JobScheduler Backup Cluster

Here we have a primary JobScheduler which has the start option -exclusive.

Introduction

Clustering applies to both JobScheduler Master instances and Agent instances.

The following wording is applied:

• Fail-over indicates an abnormal termination of the current Master/Agent instance and causes the next available Master/Agent instance to take the active role in a cluster.
• Switch-over indicates normal termination of the current Master/Agent instance and causes the next available Master/Agent instance to take the active role in a cluster.

Master Cluster

The following JobScheduler Master cluster types can be configured, depending on the desired behavior:

• The Master Passive Cluster provides fail-over functionality from one active Master instance to one out of a number of standby Master instances.
• The Master Active Cluster makes use of the JobScheduler's Distributed Orders feature to provide load sharing with a number of active Master instances.

The architecture of the Master cluster types is described in the following diagrams:

• Passive Cluster
• Active Cluster

Note that both types of cluster can be used to provide:

• Cross-Platform Scheduling using Master / Agent Clusters and
• Central Configuration using a Supervisor JobScheduler 

Agent Cluster

The following Agent cluster types are available:

• The Agent Passive Cluster implements fixed-priority scheduling: the first Agent is used for any job executions, if the first Agent becomes unavailable then the next Agent is used.
• The Agent Active Cluster implements round-robin scheduling: for each next task the next Agent is used. If an Agent becomes unavailable then it will not be used.

The architecture of the Agent cluster types is explained with the following diagram:

• Agent Cluster

Agent Clusters are a functional layer on top of installed Agents. The same Agent can be a member in any number of Agent Clusters.

For job execution Agent Clusters provide more flexibility than Master Clusters.

Which Cluster Option to choose?

In almost any situation the Master Passive Cluster is the preferable option.

In combination with an Agent Passive Cluster or Active Cluster this offers high availability and scalability at a highly flexible level.

Master Cluster

The following comparison applies to execution of jobs and job chains directly with a Master:

Explanations:

When used with an Agent Cluster then jobs are executed with Agents instead of the Master. This drastically reduces the load on the Master, more precisely there is no noticeable difference in performance between Master Passive Cluster and Master Active Cluster if jobs are executed with Agents. 

• The Master Passive Cluster is the preferable choice for most scenarios except for situations when a high load of jobs  (>500 parallel tasks) is expected.
• The Master Active Cluster is the preferable choice in a situation only when a larger number of jobs have to be executed with Masters (without using Agents).

Agent Cluster

The following comparison applies to execution of jobs with Agent Clusters:

Explanations:

• Agents do not know of job chains, they execute jobs only. Job chains and other dependency mechanisms are handled by the Master.
• Agents do not use a database connection.

Cluster Operation

Master Cluster

A fail-over occurs in the following situations when a Master instance is abnormally terminated:

• The machine operating the Master crashes.
• The Master process is killed. Consider that there is no guarantee that processes for running tasks will be killed.
• The Master is aborted
  • This operation will kill any running tasks and will abnormally terminate the Master.
  • This operation is available from the JOC Cockpit Dashboard and from the command line.

No fail-over occurs in the following situations:

• The machine operating the Master is normally shutdown.
  • For Linux operating systems using systemd or init.d the shutdown sequence of services is applied that will normally terminate the Master.
  • For Windows operating systems the Master Windows Service will receive a stop signal and will normally terminate.
• The Master is normally terminated.
  • Termination of the Master is delayed until all running tasks are completed.
  • This operation is available from the JOC Cockpit Dashboard and from the command line.

GUI Operation

Active Master Operations

The Dashboard offers the following operations for the active Master instance:

Image Added

Explanations:

• Normal termination without fail-over
  • Terminate: Termination of the Master is delayed until all running tasks are completed.
  • Terminate with Timeout: Termination of the Master is delayed until all running tasks are completed or until the timeout is reached and running tasks are killed.
  • Terminate and Restart: Same as Terminate but causes the Master to restart.
  • Terminate and Restart with Timeout: Same as Terminate with Timeout but causes the Master to restart.
• Abnormal termination with fail-over
  • Abort: Kills all running tasks and aborts the Master.
  • Abort and Restart: Same as Abort but restarts the Master.

Master Cluster Operations

The Dashboard offers the following cluster operations:

Image Added

Explanations:

• Normal termination without fail-over
  • Restart: Causes all Master instances to be restarted. The active Master retains its role.
  • Terminate: Causes all Master instances to be normally terminated. As a result the cluster is down.
• Normal termination with switch-over
  • Terminate and Fail-over: The active Master is normally terminated and the standby Master takes the active role.
  • Fail-back to Primary Master: If the Backup Master has become active after fail-over then this operation switches roles by normally terminating the Backup Master and causing the Primary Master to take the active role. This operation is delayed until all running tasks are completed.
  • Fail-back to Primary Master with Timeout: Same as Fail-back to Primary Master but kills all running tasks that exceed the given timeout.

Command Line Operation

Termination without fail-over / switch-over

The following command line operations normally terminate a Master instance without causing fail-over or switch-over to the next Master instance:

# Terminate all Master instances in a cluster, optionally specifying a timeout in seconds for running tasks
./bin/jobscheduler.sh stop 120

@rem Terminate all Master instances in a cluster, optionally specifying a timeout in seconds for running tasks
.\bin\jobscheduler.cmd stop 120

@rem Stop Windows Service from the Service Panel or from the command line indicating the Master's Windows Service Name
sc.exe stop sos_scheduler_localhost_4444

# Terminate all Master instances in a cluster, optionally specifying a timeout in seconds for running tasks
.\bin\jobscheduler.cmd terminate-cluster 120

@rem Terminate all Master instances in a cluster, optionally specifying a timeout in seconds for running tasks
./bin/jobscheduler.sh terminate-cluster 120

Explanations:

• A timeout can optionally be specified.
  • In Unix environments all running tasks are sent a SIGTERM signal. If the timeout is exceeded then all running tasks are sent a SIGKILL signal. This includes child processes of running tasks.
  • In Windows environments the Master waits for running tasks to complete. If the timeout is exceeded then all running tasks are killed. This includes child processes of running tasks.
• Without specifying a timeout the Master will terminate only after all running tasks are completed. The Master does not accept new tasks during this period.

Termination with fail-over

The following command line operations abnormally terminate a Master instance and fail-over to the next Master instance:

./bin/jobscheduler.sh abort

./bin/jobscheduler.cmd abort

./bin/jobscheduler.sh kill

./bin/jobscheduler.cmd kill

Explanations:

• Abort operation.
  
  • The Master will reliably kill all running tasks and related child processes.
• Kill operation
  • It is guaranteed that running tasks are killed, it is not guaranteed that child processes of running tasks are killed.

Termination with switch-over

The following command line operations normally terminate a Master instance and switch-over to the next Master instance:

# Terminate Master instance and optionally specify a timeout in seconds for tasks to complete before being killed
./bin/jobscheduler.sh terminate-fail-safe 120

@rem Terminate Master instance and optionally specify a timeout in seconds for tasks to complete before being killed
.\bin\jobscheduler.cmd terminate-fail-safe 120

Explanations:

• A timeout can optionally be specified.
  • In Unix environments all running tasks of the Master are sent a SIGTERM signal. If the timeout is exceeded then all running tasks are sent a SIGKILL signal. This includes child processes of running tasks.
  • In Windows environments the Master waits for running tasks to complete. If the timeout is exceeded then all running tasks are killed. This includes child processes of running tasks.
• Without specifying a timeout the Master will terminate only after all running tasks are completed. The Master does not accept new tasks during this period.

Agent Cluster

Agent Clusters do not make use of the distinction between fail-over and switch-over. In fact the Master chooses the next available Agent if an Agent becomes unavailable.

A fail-over/switch-over occurs in the following situations:

• Abnormal Termination
  • The machine operating the Agent crashes.
  • The Agent process is killed.
  • The Agent is aborted
    • This operation will kill any running jobs and will abnormally terminate the Master.
    • This operation is available from the command line.
• Normal Termination
  • The machine operating the Agent is normally shutdown.
    • For Linux operating systems using systemd or init.d the shutdown sequence of services is applied that will normally terminate the Agent.
    • For Windows operating systems the Agent Windows Service will receive a stop signal and will normally terminate.
  • The Agent is normally terminated.
    • Termination of the Agent is delayed until all running tasks are completed.
    • This operation is available from the command line.

GUI Operation

No GUI operations are available as due to the architecture JOC Cockpit does not have direct access to Agents. Instead, Agents are controlled by the Master only.

Command Line Operation

Normal Termination

The following command line operations normally terminate an Agent instance. The operation is delayed until all running tasks are completed.

# The Agent Start Script is used with its default value for the Agent port (4445) and optionally specifying a timeout for running tasks
./bin/jobscheduler_agent.sh stop 120

# The Agent Instance Script is used specifying a distinct port and optionally specifying a timeout for running tasks
./bin/jobscheduler_agent_<port>.sh stop 120

@rem The Agent Start Script is used with its default value for the Agent port (4445) and optionally specifying a timeout for running tasks
.\bin\jobscheduler_agent.cmd stop 120

@rem The Agent Instance Script is used specifying a distinct port and optionally specifying a timeout for running tasks
.\bin\jobscheduler_agent_<port>.cmd stop 120

Explanations:

• A timeout can optionally be specified.
  • In Unix environments all running tasks are sent a SIGTERM signal. If the timeout is exceeded then all running tasks are sent a SIGKILL signal. This includes child processes of running tasks.
  • In Windows environments the Agent waits for running tasks to complete. If the timeout is exceeded then all running tasks are killed. This includes child processes of running tasks.
• Without specifying a timeout the Agent will terminate only after all running tasks are completed. The Agent does not accept new tasks during this period.

Abnormal Termination

The following command line operations abnormally terminate an Agent.

# The Agent Start Script is used with its default value for the Agent port (4445)
./bin/jobscheduler_agent.sh abort

# The Agent Instance Script is used specifying a distinct port
./bin/jobscheduler_agent_<port>.sh abort

@rem The Agent Start Script is used with its default value for the Agent port (4445)
.\bin\jobscheduler_agent.cmd abort

@rem The Agent Instance Script is used specifying a distinct port
.\bin\jobscheduler_agent_<port>.cmd abort

# The Agent Start Script is used with its default value for the Agent port (4445)
./bin/jobscheduler_agent.sh kill

# The Agent Instance Script is used specifying a distinct port
./bin/jobscheduler_agent_<port>.sh kill

@rem The Agent Start Script is used with its default value for the Agent port (4445)
.\bin\jobscheduler_agent.cmd kill

@rem The Agent Instance Script is used specifying a distinct port
.\bin\jobscheduler_agent_<port>.cmd kill

Explanations:

• Abort operation.
  
  • The Agent will reliably kill all running tasks and related child processes.
• Kill operation
  • It is guaranteed that running tasks are killed, it is not guaranteed that child processes of running tasks are killed.

Cluster Configuration

Master Cluster

• Two or more Master instances can be operated as a cluster.
• All Master instances in a cluster have to:
  
  • be identified by the same JobScheduler ID and 
  • use the same database.
• Furthermore, each Master in a cluster has to be started with one of the following cluster options:
  • -exclusive
  • -exclusive -backup
  • -distributed-orders
• See http://www.sos-berlin.com/doc/en/scheduler.doc/command_line.xml for more information about Master startup options.
• The following types of Master clusters can be configured, depending on the cluster startup options used.

Master Passive Cluster

...

• We assume a Primary Master with the start option -exclusive.
• Backup Masters will use the start options:
  • -exclusive 
  • -backup 
  • -backup-precedence=n
  • • • where n is a number.
      • The option -backup-precedence is optional and the number n defines the order in which

  ...

  • • • the Backup Masters become active.
  • The Primary Master exclusively will be active once all the Master instances have been started.
  • All Masters in the cluster use

  After you have start all JobScheduler of this cluster only the primary JobScheduler is active.

  ...

  • the same configuration (

  ...

  • jobs,

  ...

  • job chains,

  ...

  • orders, etc.).
  • A Backup

  ...

  • Master will not become active if the Primary Master terminates in a normal way.

  ...

  • If the Primary Master is aborted or its process is killed (e.g. the

  ...

  • server crashes) then the (next) Backup

  ...

  • Master will become active and will be aware of job states and order states. That is, the 'new' Master will be aware of whether 
    • jobs or job chains are stopped or active, 
    • job chain nodes are stopped, skipped or

  ...

  • • active,

  ...

  • • orders are suspended or

  ...

  • • active and 
    • what their current state is.
  • The Backup Master waits ca. 130 seconds to be certain that the Primary Master is down before it becomes active.
    
    • All starts of jobs and orders that would take place within this time will be lost, the jobs and orders will run at the next scheduled time.
  • If a Backup

  ...

  • Master is active and the

  ...

  • Primary Master is restarted then

  ...

  • the Backup

  ...

  • Master has to be terminated in order to re-activate the Primary Master.

  See also

  • How will the watchdog mechanism monitor for cluster fail-over?

  • http://www.sos-berlin.com/doc/en/scheduler.doc/backupscheduler.xml

  JobScheduler Load Balancing Cluster (Distributed Orders)

  Change Management References

  Jira
  server SOS JIRA columns type,key,issuelinks,fixversions,status,priority,summary,updated maximumIssues 20 jqlQuery labels in (active-cluster) serverId 6dc67751-9d67-34cd-985b-194a8cdc9602

  Master Active Cluster

  • All Masters in this cluster use

  ...

  • the start option -distributed-orders.

  After you have start all JobScheduler of this cluster then all are active.

  ...

  • All Masters in this cluster will be active once they all have been started.
  • Each Master in this cluster will handle its own jobs independently, with the exception of orders for job chains that are configured as distributed.
  • Distributed Orders are handled in way that each cluster member can process any step of an order within a job chain. Cluster members use a load sharing logic to determine which Master instance should process the next job for an order in a job chain based on the number of tasks currently running with each Master.

  See also

  • Jira
    server SOS JIRA columns key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution serverId 6dc67751-9d67-34cd-985b-194a8cdc9602 key JS-1177

  • Jira
    server SOS JIRA columns key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution serverId 6dc67751-9d67-34cd-985b-194a8cdc9602 key JOC-48

  • Jira
    server SOS JIRA columns key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution serverId 6dc67751-9d67-34cd-985b-194a8cdc9602 key JS-1251

  • How to configure balanced distributed orders

  • How to manage Distributed Orders in JobScheduler clusters

  • http://www.sos-berlin.com/doc/en/scheduler.doc/distributed_orders.xml

  ...

  • and 
  • http://www.sos-berlin.com/doc/en/scheduler.doc/xml/job_chain.xml#attribute_distributed

  Change Management References

  Jira
  server SOS JIRA columns type,key,issuelinks,fixversions,status,priority,summary,updated maximumIssues 20 jqlQuery labels in (active-cluster)

  How can I set the cluster start option

  ...

  serverId 6dc67751-9d67-34cd-985b-194a8cdc9602

  How to set cluster start options

  • You can set cluster options during installation of the Master.
  • Edit the ./bin/jobscheduler_environment_variables file.(sh|cmd)

  ...

  • as described below to change the cluster options after installation has been completed and the cluster has been made operational:

  Unix

  • stop the Master

  • edit ./

  ...

  • bin/jobscheduler_environment_variables.sh

  ...

  • Code Block

  ...

  • language bash

    SCHEDULER_CLUSTER_OPTIONS=-exclusive

  ...

  • start the Master

  Windows

  • stop the Master Windows Service

  • remove the Master Windows Service

    Code Block
    language bash
    .\bin\jobscheduler.cmd remove

  • modify .\bin\jobscheduler_environment_variables.cmd

  ...

  • Code Block

  ...

  • language bash

    SET SCHEDULER_CLUSTER_OPTIONS=-exclusive

  ...

  See also http://www.sos-berlin.com/doc/en/scheduler_installation.pdf

  • install the Master Windows Service

    Code Block
    language bash
    .\bin\jobscheduler.cmd install

  • start the Master service
  • See also JobScheduler Installation Manual

  Agent Cluster

  See JobScheduler Universal Agent - Installation & Operation

  Cluster tab in JOC

  If you open JOC of a JobScheduler which is member of a cluster then a Cluster tab is displayed.
  Here you see a list of all cluster members.

  Example: Backup Cluster
  Image Removed