Table of Contents | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
Preconditions
- A Jade Client YADE Client in the DMZ is used to send files to the internet via a DMZ as a jump server it is necessary to install the JADE YADE client (barebone client without configuration) on the jump server before starting the file transfer.
- JADE YADE Client or JobScheduler with JADE YADE JITL Jobs on local site.
- Configuration file with jade YADE profiles
Start the File Transfer
...
The process is controlled and checked by a JADE YADE Client in the intranet.
The JADE YADE Client is running the steps described below and as shown in the diagram.
...
As a first step, after checking and creating the temp-folder, the files from the local filesystem file system are copied by the JADE client YADE Client to the temp-temporary folder in the DMZ.
(2) Start
...
YADE Client on DMZ by SSH
The JADE YADE Client is starting the JADE YADE CLI on the DMZ, using SSH.
(3) Copy data to Internet
The JADE YADE CLI on the DMZ is transferring the files to the destination site in the internet.
...
After successful transfer the JADE YADE Client is deleting the files on the DMZ using SSH.
...
If configured to do so, the files on the sending site will be deleted by the JADE YADE Client.
Example CopyToInternet
...
YADE JITL Job
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
<?xml version="1.0" encoding="ISO-8859-1"?> <job order="no" stop_on_error="no"> <params > <!-- SOURCE ==> DMZ ==> TARGET --> <!-- file settings --> <param name="file_spec" value="^jade_test_bigfile_.*\.csv$"/> <!-- operation copytointernet --> <param name="operation" value="copytointernet"/> <param name="verbose" value="2"/> <!-- file source local_source Jobscheduler host--> <param name="source_host" value="localhost"/> <param name="source_dir" value="C:\sandbox\source"/> <param name="source_protocol" value="local"/> <!-- DMZ server settings--> <param name="jump_host" value="gollum"/> <param name="jump_user" value="jenkins"/> <param name="jump_ssh_auth_method" value="password"/> <param name="jump_password" value="Bt347w%3Ka-AuZp"/> <param name="jump_protocol" value="sftp"/> <param name="jump_command" value="/home/jenkins/sos-berlin.com/jade/client.1.7-SNAPSHOT/bin/jade.sh"/> <!-- target server settings--> <param name="target_host" value="homer.sos"/> <param name="target_port" value="22"/> <param name="target_protocol" value="sftp"/> <param name="target_user" value="test"/> <param name="target_ssh_auth_method" value="password"/> <param name="target_password" value="D3f*-ex;n55N6Hx"/> <param name="target_dir" value="/home/test/inbound"/> <!-- use explicit passive mode if firewall blocks the data connection --> <param name="target_passive_mode" value="true"/> </params> <script language="java" java_class_path="" java_class="sos.scheduler.jade.Jade4DMZJob"/> <run_time /> </job> |
Example CopyToInternet
...
YADE Client Profile
Code Block | ||||
---|---|---|---|---|
| ||||
[CopyFromInternet] file_spec = \.txt$ ;;operation copyfrominternet operation = copyfrominternet verbose = 2 ;; file source server settings ;; source_host = homer.sos source_port = 22 source_protocol = sftp source_user = test source_ssh_auth_method = password source_password = D3f*-ex;n55N6Hx source_dir = /home/test/outbound ;; use explicit passive mode if firewall blocks the data connection --> source_passive_mode = true ;; DMZ server settings ;; jump_host = gollum jump_user = jenkins jump_ssh_auth_method = password jump_password = Bt347w%3Ka-AuZp jump_protocol = sftp jump_command = /home/jenkins/sos-berlin.com/jade/client.1.7-SNAPSHOT/bin/jade.sh ;; file target localhost ( JadeYADE clientClient host) ;; target_host = localhost target_dir = C:\sandbox\target target_protocol = local |
Receive files from internet via DMZ
1) Copy data
As a first step, after checking and creating the temp-temporary folder, the files from the remote server are copied by the JADE client YADE Client to the temp-temporary folder in the DMZ.
(2) Start
...
YADE Client on DMZ by SSH
The JADE YADE Client is starting the JADE YADE CLI on the DMZ, using SSH.
(3) Copy data to Internet
The JADE YADE CLI on the DMZ is transferring the files to the destination site in the internal zone
...
After successful transfer the JADE YADE Client is deleting the files on the DMZ using SSH.
...
If configured to do so, the files on the receiving site will be deleted by the JADE YADE Client.
Example CopyFromInternet
...
YADE JITL Job
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
<?xml version="1.0" encoding="ISO-8859-1"?> <job order="no" stop_on_error="no"> <params > <!-- SOURCE ==> DMZ ==> TARGET --> <!-- file settings --> <param name="file_spec" value="\.txt$"/> <!-- operation copyfrominternet --> <param name="operation" value="copyfrominternet"/> <param name="verbose" value="2"/> <!-- file source remote SFTP server settings --> <param name="source_host" value="homer.sos"/> <param name="source_port" value="22"/> <param name="source_protocol" value="sftp"/> <param name="source_user" value="test"/> <param name="source_ssh_auth_method" value="password"/> <param name="source_password" value="D3f*-ex;n55N6Hx"/> <param name="source_dir" value="/home/test/outbound"/> <!-- use explicit passive mode if firewall blocks the data connection --> <param name="source_passive_mode" value="true"/> <!-- DMZ server settings--> <param name="jump_host" value="gollum"/> <param name="jump_user" value="jenkins"/> <param name="jump_ssh_auth_method" value="password"/> <param name="jump_password" value="Bt347w%3Ka-AuZp"/> <param name="jump_protocol" value="sftp"/> <param name="jump_command" value="/home/jenkins/sos-berlin.com/jade/client.1.7-SNAPSHOT/bin/jade.sh"/> <!-- file target localhost (JobschedulerJobScheduler host) settings --> <param name="target_host" value="localhost"/> <param name="target_dir" value="C:\sandbox\target"/> <param name="target_protocol" value="local"/> </params> <script language="java" java_class_path="" java_class="sos.scheduler.jade.Jade4DMZJob"/> <run_time /> </job> |
Example CopyFromInternet
...
YADE Client Profile
Code Block | ||||
---|---|---|---|---|
| ||||
[CopyFromInternet] file_spec = \.txt$ ;; operation copyfrominternet operation = copyfrominternet verbose = 2 ;; file source localhost (jadeYADE clientClient host) settings ;; source_host = localhost source_dir = C:\sandbox\target source_protocol = local ;; DMZ server settings ;; jump_host = gollum jump_user = jenkins jump_ssh_auth_method = password jump_password = Bt347w%3Ka-AuZp jump_protocol = sftp jump_command = /home/jenkins/sos-berlin.com/jade/client.1.7-SNAPSHOT/bin/jade.sh ;; file target remote SFTP server settings ;; target_host = homer.sos target_port = 22 target_protocol = sftp target_user = test target_ssh_auth_method = password target_password = D3f*-ex;n55N6Hx target_dir = /home/test/outbound ;; use explicit passive mode if firewall blocks the data connection --> target_passive_mode = true |
Related Downloads
...